Results 1 to 3 of 3

Thread: Making a new setting bench

  1. #1
    Join Date
    Mar 2011
    Location
    Manchester UK
    Posts
    741

    Default Making a new setting bench

    Hope ths is in the right place to put this on the forum.
    I have started to make a setting bench. First of all I'm not a carpenter despite my name! I sketched up what I wanted with measurements then had the local woodshop cut the panels for me. I used 18mm Plywood for most of it. I originally built the sides to fit a filing cabinet but decided against it and went for shelves. I attached most parts with glue and biscuits to keep it firm. Its approx 600mm deep x 1400 mm wide x 1000mm height.
    Click image for larger version. 

Name:	DSC_1163.jpg 
Views:	18 
Size:	60.7 KB 
ID:	12288

    The big panel on the top is to screw on the back of the legs to stop things wobbling.

    Click image for larger version. 

Name:	DSC_1170.jpg 
Views:	19 
Size:	56.4 KB 
ID:	12289

    A bit further on. I have the shelves fitted. I used 4 small plastic blocks under each shelf to secure them. The main work table was fitted on top of 3" x 2" so it should be nice and solid, I made the shelf height fit my motors and air hammer so they would be easily at hand. I temporarily attached the scope so I could set the table height up to keep my back straight while I work .

    Click image for larger version. 

Name:	DSC_1212.jpg 
Views:	22 
Size:	35.3 KB 
ID:	12290

    Everything removed again and I cut some kitchen worktop material for all the surfaces. I stuck it on with builders bonding grip glue. I'm not sure if I want to varnish it or paint it white, Job for this week. I need to hoover up now!
    Last edited by josef1; 26-01-2020 at 10:23 PM.

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,359

    Default

    Looks good, a couple of suggestions, you may have already planed this, round the corners of the bench top, you will be very glad you did the first time you walk into it
    One more suggestion/opinion finish it with some time of varnish paint will chip every time knock it with something ( it is in a workshop it will happen ) and it will start to look very ordinary in no time.
    maybe some batten on the outside edges to keep a check on those runaway stones.
    Last edited by china; 27-01-2020 at 04:36 AM.

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    7,990

    Default

    Hope you will enjoy working on that for many years to come, Josef. My suggestion: use some hidden metal brackets to fix the op to the wall. Dennis.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •