Results 1 to 2 of 2

Thread: Vallorbe piercing frame

  1. #1
    Join Date
    Aug 2010
    Posts
    5

    Default Vallorbe piercing frame

    Does any one else have real problems with the new Vallorbe piercing saw frame, getting the bottom nut to secure the blade? I find that when I replace a saw blade putting top nut holds but the bottom nut doesn’t. I have about 6 of these Vallorbe piercing saws in my workshop - as I run classes, and they all seem to do it! 😬 I only have this problem with the Vallorbe piercing saw frame, never with my trusty old eclipse!

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    7,415

    Default

    Not a commonly found make in UK. It looks as if the saw blade is inserted into a hole and tightened with a knurled nut.

    Maybe you can take out the offending nut and see what is preventing the blade from being fully inserted, or the nut from going fully home.

    Failing a resolution, I would get a new set of frames with clamps and wing nuts and let your poor students off the hook, so to speak. Dennis.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •