Hi all,
Just a quick introduction - I have zero jewellery making experience or knowledge but really got the creative urge a couple of months ago to make some jewellery.
I decided to get stuck in and met with a jeweler to create a pendant. The process opened up a whole new world to me and I have a few questions about the process I went through before I do it over again for other designs I would like to make.
I appreciate any help anyone can give me and apologies for what is likely to be a very long post.
I created a wings pendant for production through the process of wax carving/having a mould made and casting. It was quite a costly process and I wanted to understand a couple of things in relation to the process through which this necklace was made. I attached a picture of it, the attachment is called Wings Pendant 2.
Questions
1. What ballpark figure would you expect a jeweller to charge for creating a pendant from start to finish i.e. he very quickly knocked up a 3D image from a picture and then 3D printed out a resin/wax version(?), worked the texture into the wax/resin by hand, cast it in brass to create a master, created the mould so I could re-create the pendant and then cast again, plated and finished to create the first piece.
He indicated that his normal pricing would be between £1000-£1500 to create a piece for production because he takes into consideration the unlimited number of copies that can be made once a mould is produced. Luckily I didn't get charged anywhere near this being my first time, he discounted heavily but I really wonder if it actually costs this much every time for someone to bring a design to life? It doesn't seem feasible to create a collection then unless you have quite a lot of money?
2. Because he said creating a mould to reproduce unlimited amounts was where the cost comes from, I looked high and low to see how much this costs but all I got were quotes to create a mould in the region of £40-£50 so I don't understand his pricing. I understand he took time by hand to make it look organic and so his per hour cost was high but should I really expect this every time?
3. My next train of thought was that if its the per hour cost of making something look organic, can this be worked into the CAD. I attempted this with my second design which I've had printed in a resin. Please see attachment Oval Resin Print. I haven't had this cast yet but I've been told it won't work too well and I will loose a lot of the texture when it gets to the final product. So my next question is - to make things look vintage, is this something that has to be done by hand rather than incorporated into a CAD file? Eg. having slightly uneven surfaces or imperfect circles or small blemishes on the surface
4. I am really obsessed with vintage looking finishes like the 3rd and 4th picture I have attached, Bangle 1 and Vintage texture. Does anyone know how you can achieve finishes like this? Is this something that you would work into your wax to create your master?
5. I also love the finish on the 5th attachment I have included MK Vintage 1 - does anyone know how you would achieve something like this?
6. What is the cheapest way to go from idea to mould, would it have to be very simple with no intricate details to be added by hand? ideally I would just like to have a CAD design produced of my idea, print and a mould created, all of which aren't that expensive in themselves so I just struggle to understand where the cost is coming from.
7. For any given design I have made, I don't want to create 100+ initially. I'm still very new to this and would like to be quite cautious. I'd like to create small batches at a time until I get going properly. Should I go about things differently if I want to do it this way?
Apologies for the extremely long post and what is possibly some very silly questions. I really appreciate any help anyone can give me.
Thank you very much
Bookmarks