If any one has a Grs Engraver for sale please let me no
If any one has a Grs Engraver for sale please let me no
Yes for setting
Hi John *as seen on tv*
You might try the engraving forums, though most are US based.
Hope you join in the forum with your knowledge.
Thanks Chris I will do, not sure. If it would benefit me been doing old scool for a long time but I will get one and give it a go
But I thing it will speed up cutting out channels and save my hand from wereing uot.
And yes only to pleased to help out 35 years experience as well as teaching.
We should all get together and set out a standard setting price across the globe
http://www.diamondsetting4u.com
Last edited by johnmoto; 09-01-2015 at 01:18 AM.
Someone in China did that without consulting the rest of us.
Get up to the Garden & find a tool shop where you can test drive one...it`ll help speed up some of the heavier cutting, but you`ll be wanting a compressor & sharpening system for the tool blanks.
The other two manufacturers of air power systems are lyndsay & enset which are both great & do a similar job, but you won`t likely find cheap 2nd hand.
Then you`ll want a microscope...ect ect.....
If you don`t fancy spending a fortune, get a benchmate system & remain old school.
This will take alot of pressure off your clamp holding hand & you`ll find it helps alot...this is because it holds the work alot tighter than you can by hand & you don`t lose that energy generated..so you`ll find cutting alot easier.
Last edited by Gemsetterchris; 09-01-2015 at 08:47 AM.
I am going to Stubbs in the garden next week to try out there's, as I have done work for them time to time they wanted
Me to work at there premises or be very close to them in the garden but I am not going back up there for 25 years had enough up there , they will not give out work unless your very close to them as you have no doubt found that out,
I was speaking to George from Stubbs tonight about you he said he nows you and both agreed you should put some
Pictures of your work on your website so people can see what you can do .
Bookmarks