Smiths Little Torch

**Goldsmith** · 23-10-2014, 02:27 PM

Nick, this is the type of oxygen regulator I use; https://www.weldequip.com/oxygen-regulator.htm it has two dials, one tells you how much pressure you have in the cylinder and the other is the adjustable oxygen output pressure.
and these are the flashback arrestors; https://www.weldequip.com/flashback-arrestors.htm

You just need a standard regulator on the propane cylinder, like these; http://www.amazon.co.uk/Propane-Regu...ulator+propane

I have a double outlet regulator and have my Seivert piped into the same propane cylinder.

James

**Wallace** · 23-10-2014, 02:31 PM

I have an oxy flashback arrestor, never used.

**caroleallen** · 23-10-2014, 05:27 PM

I'd agree with George. The Oxycon is much safer and very easy to use.

**Tabby66** · 23-10-2014, 08:22 PM

I switched from oxygen cylinder to the Oxycon.....I'd highly recommend it too Nick.....firstly it doesn't get your insurance twitchy!!!!.....it is easy to use and always there at hand....it doesn't run out.....by the time you've paid your bottle charge and oxygen fill/refill.....you'll soon recoup your money!!!

When I first set-up I used BOC....very helpful and did exactly as you suggested.....you need this and this....now just the fuel.....(but I'd still use an oxycon...I do still get my propane through them)