You will probably have to wiggle it more to make it as loose as possible first. Then try the sticky tape. Dennis.
You will probably have to wiggle it more to make it as loose as possible first. Then try the sticky tape. Dennis.
Thanks again - just while I'm on do you recommend a specific glue I have a few 2part epoxy including gorilla and E 1000 ?
Sent from my SM-G780F using Tapatalk
Yes, as the bullet is tapered you will need to use your pusher again after gluing, so that the edges don't stand away.
So I would suggest a two part epoxy, used sparingly not to show, and slow enough to allow you to do some setting.
Once it looks good, don't test for wobble until the resin has set.
Aww thanks Dennis you're a star
Sent from my SM-G780F using Tapatalk
Bookmarks