I have the H20 handpiece for the Foredom SR I recently bought some attachments 3/32 but they are a little loose in the handpiece. Can I tighten the chuck or is there another solution?
I have the H20 handpiece for the Foredom SR I recently bought some attachments 3/32 but they are a little loose in the handpiece. Can I tighten the chuck or is there another solution?
Yes, with the collet open, you need to unscrew the nose and inset a 1.5mm Allen key. Hold the shaft and turn the key clock wise a little. Test before replacing the nose.
This video shows it, but you only need the very end manoeuvre for a small adjustment. https://www.youtube.com/watch?v=hnM1u4Wuf-A Dennis.
Thank you so much, I thought I had damaged the handpiece !! Now to buy a 1.5mm Allen key ......
Bookmarks