-
Another ring
I have been asked i to make a ring, or at least four rings fixed at the back and slightly apart at the front with four c.z's randomly across the four rings. I have made four rings and soldered them together at the back, but when I bend the silver "d" wire slightly apart the solder splits. I have done this several times now and don't want to be beaten by it. I made the rings and soldered together afterwards, would it be worth cutting the d wire and soldering before bending into ring shape. The one the customer saw was cast.
Last edited by Patstone; 02-11-2017 at 09:44 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks