Originally Posted by
eamon
Thanks Dennis, I was thinking that with the gearbox it says only once a year to apply gear grease. I only use the mill once fortnightly, so shouldn't be an issue. But it did say in the manual where the springs are should be oiled once per week. I haven't done it yet as didn't want to use the wrong oil. I will have a look for the WD40 Silicone lubricant and apply sparingly to the springs. One thing on my fifth or sixth rolling of sheet, I noticed really micro white speckles on the sheet. I examined the rolls and there was tiny white dots on them which must have come from my cleaning with white spirits and kitchen roll. Luckily I was able to get most of the white specks of the rolls. Thanks for the tip!
Bookmarks