Where can I get 9ct white bezel strip?

[enigma]

I can't seem to find it anywhere but not sure if its just my searches not working very well, surely somebody sells it?
Preferably 0.3mm by 3mm or wider is also fine.

Thanks in advance.

[Dennis]

Hi E,
First of all I would advise that you buy sheet cut to your requirement rather than bezel strip, so creating less waste. Unfortunately Cookson only have 0.5mm sheet, which you would find very tough to push home, unless you already have a mill and can roll it down to at least 0.3mm.

Betts metals have 0.25, which is on the thin side verging on flimsy, but would be a doddle to push. The only reservation I have is that this thickness tends to melt easily, so work in semi- darkness, so that you can detect over heating and move away. Possibly also use easy solder.

Welcome to the forum, Dennis.

http://www.bettsmetalsales.com/p-Bullion-Sheet

[enigma]

Thats great thanks so much Dennis.
I had looked for sheet on Cookson but figured the 0.5mm would be extremely tricky!