Search:

If you have any powder rouge Sheen, mix it to a paste with water and paint it on the previous joints, the fat will prevent the solder from re-flowing.

So this is what we do when the weather allows: https://youtu.be/S6pOf2LXovo
When the pickle in its pot freezes, I know its cold enough to skate. You may recognise Kinderdijk, from C4s Great...

...and there is our next Lounge debate....

just contact your supplier maybe?

Thanks guys for your participation. I have made my proposal to my client with the caveat that should it go pear shaped, it will need to be smelted and something new made. I await her go ahead....In...

Hi guys,
I hope all is well with everyone. So this split hollow silver bangle arrived in the post today for repair. I have in mind what I will do to it, what would you do?

12858

I have replied to your previous post on this subject....

Here are the contact details for the Heimerle & Meule Group Spain, you will have to see for yourself if they supply what you need.

https://www.sempsajp.com/inicio/
SEMPSA Joyería Platería, S.A....

Seems its probably the gunk keeping it together.

Could you cast them?

In your flex shaft place 2 sandpaper discs with backs facing each other, therefore sand side facing top and bottom. Slide the discs inside the cut edges and spin your flex shaft slowly, this will...

The video looks amazing, would you be willing to share how you went about making the magnetic polisher please? I love tool hacks.

Hi and well done with the casting and especially drilling the hole through. As a tip for next time, if you can position a wooden dowel through the hole of the master when filling with sand and...

Carat of gold plating? thickness of the plating? silver tarnish coming through? probably reaction to the packaging, I know the dies used in foam inserts causes tarnish, and glue used in boxes causes...

Before making the investment and if you are wanting a quality ultrasonic, it is a real investment. Following on from what Dennis suggests; I often still turn to my old electric tooth brush, you can...

Thanks Caroline,
Chocolate makes everywhere a better place. I know in the past you have mentioned that you wanted the hammer piece with the Foredom. I have this week found a second hand...

Can you expand on why the Foredom micromotor does not meet your needs? I am still looking for a micromotor and interested in the Foredom.

I have also been known to use the hotgun glue for similar jobs.

Let us know if this helps, it will be useful for others in the future as we build upon the wealth of knowledge already here.

Hi Jack,
I am no expert here, but is seems you are probably burning the counter as you self diagnose. Enamelling is a process that requires patience and much trial and error. Take your time to...

I have made an extractor system using an old vacuum cleaner attached to a cyclone and a sealed bucket, it is not perfect but it has greatly reduced the mess around my polishing area.

Hi Dennis,

I can confirm that my 40 Euro draw bench is still working better than I could ever imagined...I love our hacks.

Depending on what it is you want to make, make your own gold alloy from pure gold and perhaps pure silver or pure copper, you will find recipes online then you know the composition is free from...

Well we have shops open so far, (expecting non necessary shops to be regulated soon) but not much else here in NL. Since Sunday no bars, restaurants, schools, cinemas, theatres, but for me the...

I use an old roasting tin