Printable View
I am finding I get a light dusting of Tripoli over my worktop and tools. Does that mean I am using too much? I do get a little build up of black that disappears after a short while.
Can anyone help me with a product to clean the brown dust off as it smears when wiped or is this something I'm going to have to live with? Alternately, is there a cleaner product you would recommend for a pre-polish and if so, can I continue to use rouge?
Thank you in advance
Ian
That’s the joys of polishing Ian. Even with extraction I have a fine layer of polishing compound . Strangely even if I haven’t used the polisher for 9 months which has happened this still happens
The first line of defence is a hood to fit your polishing lathe. Even a primitive one made from a box will catch a significant amount of splatter.
For a pendant motor, working inside a cut down, transparent water container will do it.
Here is Moleroda's solution: https://www.polishingjewellery.co.uk...action-system/ Dennis
Thanks Caroline, it just goes to show what is lingering in the atmosphere. I work in a spare bedroom, so need to address the problem!Quote:
Originally Posted by CJ57
Stay safe and sane
Ian
Thanks Dennis, I shall get to work on a DIY version as you suggest for my pendant motor. The Moleroda solutions look good but rather expensive for what they are. I guess there is not the volume of production to keep costs down.Quote:
Originally Posted by Dennis
All the best
Ian
Depends on weather your main concern is breathing in the the dust or just keeping the are clean the Moleroda's system will only keep the the local surface relatively clean, if you wish to keep the particles from the air technicaly it depends on the area you are attempting to keep clean, without the calculation a local dust hood on a polishing motor would require Appr.200 CFM through a HEPA filter, A household vaccume when connected to a hose will not even come close to that.
So the burning question remains. Is the dust in “moderation” (but what is in moderation?) a hazard to health like many other dusts. I suppose...avoid and / or minimise as much as is practically possible. Next job: make a hood / extractor.Quote:
Originally Posted by china
I'm going to recommend the book on 'polishing and finishing' by master polisher Stephen Goldsmith. It covers all the polishing issues, including safety.
http://www.goldpolishing.co.uk/Steph..._FIPG_MNGG.htm
My family always buy presents for each other that we need/want rather than just guess. Stephen Goldsmith's book was on my list sent out a couple of weeks ago. I hadn't thought at the time about dust problems so I am pleased to see that it covers that subject as well!Quote:
Originally Posted by pearlescence
All the best
Ian
It's more of a nuisance giving some things a faint brown dusting. I use my recently purchased Foredom in reverse mode and polish in the direction of my apron. I do charge the mop on my bench so that may be the main source of the problem.Quote:
Originally Posted by Ruedeleglise
All the best
Ian
You could build a plywood hood or box quite easily to work within and definitely the dust needs to be going away from you for your own health as well as the spread in the room. I was lucky enough to get a Dustmaster maxi with extraction at a very good price years ago but I still wear a mask, scarf round my hair, glasses and polishing shirt.
I bough a piece of sheet Perspex in my refurb to screen off the polisher to stop the sideways dust. You can have the pieces cut to size and you could probably glue or bracket the sheets together. Being transparent it allows light and in a living space would remove the impression of a solid structure . Message me for the company if you want
Thanks CarolineQuote:
Originally Posted by CJ57
I have some Perspex and have cut it in the past so probably okay with that. I think a length of 100mm flexible tube and an extractor fan should do the trick.
This is such a helpful forum.
Ian