Pendant motor or micromotor? Really need some advice

Hi

I really need some advice. I'd like to purchase a drill and was about to purchase the Foredom SR jewellers kit but then started reading about the benefits of a micro motor and have ended up really confused.
My main priority is to be able to carve wax and polish pieces which have been cast . But I then want to be able to go on and potentially use my drill for metal work, stone setting etc.
I'm totally bewildered by the different options.
I have a decent amount of money to spend so I want to make a good long term choice. I'll be working from home rater than a workshop. I have a single jewelers bench by Emir so if I were to go for a pendant motor, should I have it clamped to the front or screwed into the top of the bench at either the front or back?
Or would a micro motor be better for fine work?
I've read some previous threads but some of the terminology was over my head unfortunately.

I'd really appreciate some words of wisdom :)

Not surprised that you are confused Florence. its a big decision to make, particularly if you are going to spend a substantial amount of money. Here are some thoughts:

The pendant motor has been the chief workhorse for jewellers for fifty or more years and you can achieve anything you need with it. Make sure you go for a quick release hand piece and choose one of the leading brands, which also offers a hammer handpiece if you want one in the future.
The downside is that they are rather bulky and will need a hanger, fixed to the front of your bench.

Then the micro motors came along. They are small and compact, because the much smaller motor is actually inside the handpiece. Known brands tend to be more expensive, the hammer handpiece exceptionally so. So that is one minus. The other is that the cheaper models don't have much torque, meaning that they slow down if you press hard on a rotary tool. That said, it does not create much of a problem, because you can counter it by increasing the speed.

While you are thinking about it, you might consider gambling a modest amount of money on a cheap Marathon micromotor like this:https://www.ebay.co.uk/itm/MARATHON-...cAAOSwf~9ZZH50

On arrival you will be asked for import duty and a carriers handling fee, but the total cost should still be well under £100. Dennis.

Thank you Dennis

It does seem like the Foredom pendant would be a good way to go. Because I'm going to be working from home and in a room where my children will sometimes be around, I was also a bit worried about the amount of wire and flex that might be around, though obviously I'll be around and watching them, I'm thinking I should try and limit the possibilities of them hurting themselves.
So I suppose that was also in my mind when thinking about the micromotors.

It sounds like a good idea to try out the Marathon, thanks so much for the link. If I were going to invest later, does anyone have a suggestion about which model I go for? Is it worth spending more on something 'without brushes' or that can take more than one size drill piece?

Also, does anyone have experience of carving wax with a pendant drill versus a micrometer, given that this is what I'll mostly be doing, is one better than the other?

A brushless motor has a longer life without servicing, but at a price. Provided you have a common make, changing two brushes when they wear down in say 5-6 years, is only a matter of undoing a small screw for each.

Wax carving is not a severe test for a motor and any one will do it. Note for most operations you will be using only a small fraction of the available speed.

For safety with children around, switch off at the mains. Dennis.

Hi Florence
I am in the same boat as you and have had very helpful advice from Dennis and others a few weeks ago (this forum is so good).

To be honest, I am still undecided which way to jump but am slightly veering towards the Foredom SR pendant drill. It will give me the option of cheaper hammer action in the future and I suspect it is more robust than a micro motor. At present, I use my daughter's Dremel and to be fair, it does all the polishing I need although it does slow down under side pressure. I am very aware that a micro motor or pendant will be streets ahead of the Dremel.

I will be interested to hear what you decide and further feedback would be very helpful. In the meantime, I will continue to deliberate...

Ian

Thank you Dennis, I'm very grateful that this forum exists and I can ask what must seem like very typical beginner questions without being laughed at :) or at least I cant see if they do.

You were right though, its because every purchase seems to be such an investment of money and I don't want to buy anything that will end up on ebay or the back of the cupboard.

Good to know I'm not the only one is this boat Ian. Please do let me know what you decide to do also. I think I'm probably going to follow Dennis's advice and go for the Foredom SR.

I do the vast majority of my work by hand (including most drilling), but it might be helpful to add here that I have an SR and a Marathon Micromotor (couldn't afford the Foredom!). I don't think I've touched the SR in the last six months, but use the micromotor many times every day. I think part of it is to do with the sheer 'smallness' of the micromotor, which sits invitingly on my bench and has an incredibly responsive speed control.

It doesn't have the torque of the SR, but I find the need for that so occasional that it makes very little difference. I also find the micromotor much, much easier to handle as the curly cable is less clumsy than the big flexshaft. And it's much, much quieter as well - which is good for people like me that do a lot of work at pretty antisocial hours!

I'm the same as you George, i love the micromotor that i got. Dennis recommended i get one. I find it perfect for my small flat and the little bits of drilling i need to do. I general keep the speed low which i find less scary. Just recently i used it to drill shell. Gonna try seaglass next.

I have a foredom micromotor because it was a gift from my husband. It’s really light and as George said the whole unit doesn’t take up room. My only problem is that I wanted it for stone setting and I can’t afford the hammer action hand piece which would cost the same again. I would almost be cheaper buying a pendant but that would be a waste.
Waiting to see if Cookson adds it to stock as their micromotor is much less than my original. I admit I don’t use it for drilling as I have a wee proxxon bench drill which I wouldn’t be without but that price has gone up enormously since I purchased too.

Thank you all

If I go for the Foredom SR, should I get the jewellery kit that includes all the burrs etc needed for drilling and polishing or is that a waste of money?

I have set aside around £400 so its just a question of whether I should buy both the SR and a cheap marathon for example, or whether thats a total waste and I should go for either just the SR or a much better micromotor.

The quietness of a micromotor is really appealing as is the less cumbersome cable which might be better for carving wax? But Caroline I don't want to be in the same position as you thinking I need a hammer thingy to set stones in six months time, but as a beginner that seems unlikely doesn't it?

Also, sorry to keep asking questions but...

If I by the solid tube of wax for making rings but I need a very small hole in it, is that done using a pendant drill? Because I can see myself doing that a lot.

Quote:

---

Originally Posted by Florence1

If I go for the Foredom SR, should I get the jewellery kit that includes all the burrs etc needed for drilling and polishing or is that a waste of money?

---

You can shop around, but the Cookson offer includes a selection of rotary tools to try out, a burr stand, but most important of all, a quick release handpiece. Most other companies sell the handpiece as an extra. Dennis.

Quote:

---

Originally Posted by Florence1

Also, sorry to keep asking questions but...

If I by the solid tube of wax for making rings but I need a very small hole in it, is that done using a pendant drill? Because I can see myself doing that a lot.

---

If you look at Cooksons wax carving kit ( https://www.cooksongold.com/Jeweller...wax&channel=uk), you will see the sort tools available, including the ring mandrel with a cutting edge, to ream a slice of wax tube to the required size.

The wax has the constancy of a wax candle, only less inclined to soften in the hand. It can be worked with knives, both hot and cold, and filed with coarse files. Drills can be turned by hand in a universal handle https://www.cooksongold.com/category...iversal+handle.

If that is all we are talking about, then skip the flexshaft until you need it, because you might well do without. Start with a book on wax carving, or go on a course https://www.google.com/search?client...w=1336&bih=846 Dennis.

Quote:

---

Originally Posted by Florence1

Thank you all

If I go for the Foredom SR, should I get the jewellery kit that includes all the burrs etc needed for drilling and polishing or is that a waste of money?

I have set aside around £400 so its just a question of whether I should buy both the SR and a cheap marathon for example, or whether thats a total waste and I should go for either just the SR or a much better micromotor.

The quietness of a micromotor is really appealing as is the less cumbersome cable which might be better for carving wax? But Caroline I don't want to be in the same position as you thinking I need a hammer thingy to set stones in six months time, but as a beginner that seems unlikely doesn't it?

---

I’m not sure I can answer that unless you’re sure of your future plans. You might decide to do something else. I hadn’t used a pendant since college in the 70s and just got by. I still do the small amounts of setting by hand but I have lots of other tools and machinery that make everything else much easier.
I don’t know , does the Marathon micromotor have a hammer handpiece? It might be worth buying one to get a feel for it and if you feel you’d still like a pendant then that’s still within your budget. If I’d known about the Marathon, the cost of the Foredom would have stopped me from buying it especially as I now feel it’s a luxury because it doesn’t need my needs but don’t tell my OH who should really have talked to me first:/
I haven’t carved in wax but I would probably have more control doing it by hand and drilling holes with a handheld pin vice such as this although I’d prefer single ended https://www.cooksongold.com/Jeweller...ice&channel=uk

One of these perhaps Caroline - I have several, and they're amongst my most used tools. https://www.cooksongold.com/Jeweller...ice&channel=uk

I saw that George, I have a few in different sizes but without the handle which must be comfier to use. Although if you just want to make a hole in wax it’ll not need much pressure

Thanks George and Caroline, I've got some of those pin vices which I do use for carving wax, they're excellent as you say.
I was thinking of using the drill to make holes for rings in a tube but as Dennis said, I could just use a hot tool and then a ring sizer to widen the hole, not sure why I didn't think of that before. There's no need for me to create a hole through a whole tube.
I'm aiming to use the drill for the following things

Right now...
Carving wax
Polishing finished pieces

In around six months...
setting stones and creating textures

however as you said Caroline, maybe I don't need a drill for that. Because I haven't' yet learnt how to set stones and create textures in metal I just assumed I'd need a hammer piece to do it and was trying buy something that I could add to later rather than never use again.

Has anyone come across the Foredom 1090 micromotor which includes both the rotary and the hammer hand piece. It's very expensive at £658 plus VAT but less than buying the foredom and then adding the hammer later. Even if it was worth the investment, I can only see it available at Cousins which from what I hear, isn't the most reliable of retailers? Am I right?

Thank you all by the way. Apologies for my inexperience, I'm genuinely so grateful for your input and I'm taking note!

No , I’m not sure that was available when mine was bought or maybe it was too big a spend and it’s Cousins. I have the 1070 which is now cheaper from Cookson than the cheapest available then. If you add the vat to the Cousins price it isn’t that much cheaper really, probably only about £20 although I’m looking at the prices with my guild discounts at Cookson
I wouldn't buy from Cousins for all the reasons you found in searches and definitely not on a huge spend.

A micromotor of whatever make would do all you want to do now
I have a rolling mill and you could buy a cheap one for texturing but I also find I use my Fretz hammers, chasing tools and graining tools for a lot of the texture I do at the moment. Depending on the texture you can adapt what you have or can buy cheaply
You could still do stone setting without the hammer action just use thinner fine silver, it depends if that’s going to be a main use and how much time is important

Thank you Caroline

I had no idea that Cousins would be such a mistake on a big purchase so I'll definitely look to buy from somewhere else.
I don't think I can justify the price of the Foredom 1090 at this stage so will probably go for the marathon that Dennis suggested originally and then maybe add the pendant motor if I feel I need a wider range of tools.
I'm easily seduced by a big name :)

Quote:

---

Originally Posted by Florence1

Thank you Caroline

I had no idea that Cousins would be such a mistake on a big purchase so I'll definitely look to buy from somewhere else.
I don't think I can justify the price of the Foredom 1090 at this stage so will probably go for the marathon that Dennis suggested originally and then maybe add the pendant motor if I feel I need a wider range of tools.
I'm easily seduced by a big name :)

---

That sounds like a good decision. I like to buy the best I can afford and did without for such a long time and saved. I’m a sucker for names as well but if the Marathon turns out to meet your needs for the time being then it’ll give you an idea of what you really need rather than adding to the tool graveyard we all end up with:/ will be interested to hear what you think of it

Quote:

---

Originally Posted by mizgeorge

I do the vast majority of my work by hand (including most drilling), but it might be helpful to add here that I have an SR and a Marathon Micromotor (couldn't afford the Foredom!). I don't think I've touched the SR in the last six months, but use the micromotor many times every day. I think part of it is to do with the sheer 'smallness' of the micromotor, which sits invitingly on my bench and has an incredibly responsive speed control.

It doesn't have the torque of the SR, but I find the need for that so occasional that it makes very little difference. I also find the micromotor much, much easier to handle as the curly cable is less clumsy than the big flexshaft. And it's much, much quieter as well - which is good for people like me that do a lot of work at pretty antisocial hours!

---

Which model do you have? Is it the N3? I’m interested in the quietness of it as I work in a flat at unsociable hours too.


Sent from my iPhone using Tapatalk

I actually have two, but my everyday go-to is this one:

https://www.eurofindings.com/item/16120/na-tmmm3

and a fantastic price too (you need to be registered to see prices). I've had it for quite a few years now, and it still works perfectly. When it gives up the ghost (and at that price I really don't mind), I'll almost certainly go for the Handy 700 version - mainly to be able to add a second handpiece - and again, they have the best price I've seen on that too.

That’s great. Thanks so much for that. I’m going to get one now!


Sent from my iPhone using Tapatalk

I just wanted to say a big thank you for the advice on the marathon 3 micro motor. I bought the one you advised from Eurofindings and it’s great. So quiet and love the foot pedal.

When I get more into setting and would want to use the hammer hand piece I’ll upgrade but love it for all my other jobs.
LOVE this forum. I couldn’t do without it.