Had a little accident, my bench pin is not what it once was. Any sort of rehabilition possible or should I just get my sel a new one. Main issue is no longer having a v
Attachment 12602
Printable View
Had a little accident, my bench pin is not what it once was. Any sort of rehabilition possible or should I just get my sel a new one. Main issue is no longer having a v
Attachment 12602
Glue it up with pva cramp overnight, the joint will be stronger than the timber
Need to see if i can find a clamp :)
you can also use a jubilee clip if you dont have a clamp
You can also use sellotape to hold while gluing.
Use two pieces of cord or string. Tie across the break round the peg loosely then insert a pencil..screwdriver, or about a 6 inch rod of some sort under each cord and turn the “rod”round like a tourniquet. That will give you all the compression you will need!
Sent from my iPad using Tapatalk
I don't have a jubilee clip either so I'm erring towards the sellotape or the string . I didn't think I'd get so many great replies, thanks everyone :)