PDA

View Full Version : Disc cutter set



OnlyWillow
08-09-2018, 11:58 AM
I have broken my 3mm cutter for my disc cutter set. Does Anybody know if you can get a replacement and if so where from?
Thanks

Olivia

Sent from my SM-A520F using Tapatalk

china
08-09-2018, 12:20 PM
By broken what do you mean it can most likely be reground

OnlyWillow
08-09-2018, 12:33 PM
Snapped into 3 pieces https://uploads.tapatalk-cdn.com/20180908/3a66b332444c361552ecc894bfe30ffe.jpg

Sent from my SM-A520F using Tapatalk

CJ57
08-09-2018, 12:39 PM
Ooh that shouldn’t happen! Where did you buy it? I would imagine if it wasn’t from a reputable company then getting a replacement isn’t likely unless you can get a machine engineer to make you one

OnlyWillow
08-09-2018, 12:45 PM
It's years old. I bought it from cookson gold many tears ago. I'll have to do some digging. Thanks for your help

Sent from my SM-A520F using Tapatalk

china
08-09-2018, 02:09 PM
Is it just the punch that is broken or is it the hole unit that has come apart

OnlyWillow
08-09-2018, 02:12 PM
Juat the 3mm punch

Sent from my SM-A520F using Tapatalk

china
08-09-2018, 02:19 PM
You could purchase a piece of silver steel from some where like this, https://www.cromwell.co.uk/shop/materials-and-maintenance/silver-steel/silver-steel-metric-round-sizes/f/1579?6292=3.0&query=&brandId=&price=&general=&skip=0&limit=10&categoryId=160205
then grind and harden it it really is not that difficult, if you wish to do this I can tell you how to go about it

china
08-09-2018, 02:27 PM
Another idea would be to purchase a 3 mm HSS drill from the hardware store and cut the plain end off use that, you would need to grind the cutting end square and flat,
if you look at the other punches you will see how they are ground, you could do this with your pendant motor or dremel or what ever you have

Dennis
08-09-2018, 09:57 PM
Well, first things first: you need to measure the diameter of the broken one with callipers, to get its exact dimensions.

Then, given what is available to you and your engineering skills, you will know whether you can replace it. To work it will have to be a good fit. Dennis

china
09-09-2018, 03:23 AM
Yes Dennis 100% agree I should have mentioned it, if the stock is larger it would be fairly simple to grind it down in a hand piece or cordless drill, if the stock is smaller well then it would not be viable, after saying all that it might be a good excuse to go out and buy a fancy new one

OnlyWillow
23-09-2018, 04:14 PM
Thanks guys. I'll have a go at making myself one. That's good

Sent from my SM-A520F using Tapatalk

Paul Kay
25-09-2018, 11:22 AM
You could get a replacement 3mm punch (pack of 2) and other diameters, from a USA based supplier e.g. https://www.riogrande.com/product/steel-punch-for-swanstrom-disc-cutter-3mm-dia/11259403, though whether that is a cost effective solution once you've factored in postage, packing and import duty, you would have to judge yourself.

OnlyWillow
25-09-2018, 11:27 AM
Thanks Paul. I'll definitely look into that.

Sent from my SM-A520F using Tapatalk

Paul Kay
25-09-2018, 11:43 AM
Here you go; 3mm disc punch replacement, I knew I'd seen some UK stock somewhere:https://www.cousinsuk.com/product/7-diameters-03-to-0125mm Worth a chance for £3.95 + VAT? It looks like 3mm is a popular replacement size :)

OnlyWillow
25-09-2018, 11:55 AM
Yes great That's brilliant

Sent from my SM-A520F using Tapatalk