DIY Jewellers desk

[TATS]

First off, all the best for the new year and your business.

I have been a little preoccupied with my day job, birthday and having to buy a new car, but I am back to start my first project.

About time I made a start and I was looking for something that will act as a beginners jewellery desk. I have seen something at Ikea that may be suitable with a few adjustments and wondered what you think. It will just be used for making basic rings for now. One is a corner desk and the other just a normal straight desk.

http://www.ikea.com/gb/en/products/desks/table-tops-legs/linnmon-alex-table-birch-white-spr-09047121/

http://www.ikea.com/gb/en/products/desks/desk-computer-desks/brusali-corner-desk-white-art-10304992/

[Faith]

Hi there,

I can recommend the Alex base units as in your first link. My bench is comprised of two of them, with a solid oak ikea kitchen worktop cut to size and sat on them. The base units are super sturdy, although I expect while the legs screw on, the left side of that bench top will just rest on rubber bumpers sat on the Alex unit and so could move around. May not be a problem depending on the weight of the bench top and what ur doing, if it were you could always add a bracket at the back to secure.

I wonder if the bench tops in your links might not wear so well as proper wood (for example should u drop hot things on it) but if you can live with that its probably cheaper than solid wood.

I haven't ever had a real jewellers bench, but I have wondered over time if they're taller than a regular desk. At any rate I sometimes find the working position a bit low, so I'm thinking of getting a shorter chair!

hope that helps,
Faith

[Dennis]

As Faith has already pointed out, whichever you choose might have to be made more rigid, and adjusted for relative height by lowering the chair.

Also while you concentrate on your work, items will hurl themselves onto the floor, so barrier back and sides is needed.

Some people feel that a cut out is essential, but it will sacrifice a huge amount of work space in a home situation.

Drawers tend to give way under the weight of steel tools, so they might be best in plastic bins on the floor or on shelves.

A butchers trolley from Ikea for heavy items has also been mentioned'

The work surface can be improved by using an A3 cutting mat. In place of a skin you can use a drawer. Flooring must also be considered for when you drop hot things and also for visibility of small dropped items.

Here is one thread from the past: http://www.cooksongold.com/forum/showthread.php?t=6586&highlight=work+bench Dennis.

[Nick martin]

Personally I'd make your own. Thats precisely what I did. Really simple job with no serious joinery skills needed, and it'll cost you £50-60 and be built to your exact spec and like a tank.

Nick

[TATS]

Personally I'd make your own. Thats precisely what I did. Really simple job with no serious joinery skills needed, and it'll cost you £50-60 and be built to your exact spec and like a tank.

Nick

Hi Nick

Thanks for the idea. I think Dennis has linked to your build thread and is certainly food for thought. Will let you know what I decide and how I get on. Do you mind if I "replicate" your design?

[Nick martin]

Hi. I think the link Dennis posted is one of his own design and not mine.

These are my build pics although I've now added and expanded it as time has gone on and I've found myself needing more bench space.

Cheers,

Nick

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1369_zpszudshtf6.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1369_zpszudshtf6.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1370_zpswqb3j07r.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1370_zpswqb3j07r.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1371_zps0socqtax.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1371_zps0socqtax.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1376_zpshj8mh4wu.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1376_zpshj8mh4wu.jpg.html)

[Nick martin]

Some more pics...


http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1374_zpsrikkjtxf.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1374_zpsrikkjtxf.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1377_zpsuo0wr6yn.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1377_zpsuo0wr6yn.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1378_zps57alrugn.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1378_zps57alrugn.jpg.html)

http://i1327.photobucket.com/albums/u663/Louiseandnixon/random2/IMG_1384_zpsjxvtregu.jpg (http://s1327.photobucket.com/user/Louiseandnixon/media/random2/IMG_1384_zpsjxvtregu.jpg.html)

[CJ57]

The other thing if you can still get them is an old office desk with drawers down the side. I had one for years until I got my new workshop and full length benches. I just cut out the half circle, tacked on a skin and a benchpeg et voila. It lasted years

[trialuser]

Is that an xp deus :Y:

[Nick martin]

It is... before I went back to my first loves... A Minelab CTX3030 and GPX5000 :)

Well spotted!

Nick

[ps_bond]

It is... before I went back to my first loves... A Minelab CTX3030 and GPX5000 :)


Stop that. I've only just started watching The Detectorists and I don't need the distraction :)

Nice bench; https://www.ganoksin.com/article/build-a-basic-jewelers-bench/ & https://www.ganoksin.com/article/build-an-advanced-jewelers-bench/ are links I've posted before.
Just putting together a HD workbench at the moment; for some reason this has involved my buying more tools (including a rebate plane and a dedicated mortice chisel); never mind :)

[Nick martin]

I found that one of those bosch vibration multi-tools was also a useful new purchase ( excuse to purchase ) in my case.

If you have a love and an appreciation for history Peter, then detecting is the drug to fuel the interest and the best way to get as close as possible to discovering / owning the items seen in our museums.

I've been detecting for over 20yrs and am still as addicted as I was when I found my small medieval hoard with my £250 starter machine.

Nick