View Full Version : Propane regulator
Kathryn Harrison
28-05-2014, 10:24 PM
Hey all,
I've not had my regulator very long but tested it with leak detector and it is leaking, eek! I'm really struggling to find a better quality one that will fit the flash back arrestor I have. I've already messed up and ordered one you stick a hose on rather than with a screw end >.< This doesn't look like the right connector but I found it mentioned as fitting a flash back arrestor http://gasproducts.co.uk/acatalog/LPG_Reca_912_0.5-2_Bar_High_Pressure_Propane_Gas_Regulator.html but I'm really getting into a mess about it!
Kathryn
ps_bond
29-05-2014, 06:24 AM
Where is it leaking from?
The hose tail/barb is probably screwed into the body of the regulator; it may be possible to unscrew it and fit the flashback arrestor to it directly; alternatively, there are adaptors available. You can seal the connections with gas PTFE tape (it's thicker than the plumbing stuff), although I generally don't like using it if it isn't needed.
Are you using oxy-propane? If it's air/propane - e.g. Sievert - you don't need a flashback arrestor - they're only for when there's a chance of forcing pressurised O2 down the fuel line (or vice versa for the O2 line).
I can't remember offhand if the tail will be LH or RH thread BTW.
Kathryn Harrison
29-05-2014, 07:29 AM
It is one like this http://www.ebay.co.uk/itm/Lpg-Gas-Hose-Regulator-Propane-Bottle-0-5-4-Bar-6mm-Tail-Barbecue-Heater-NEW-/400714054431?pt=UK_Home_Garden_Hearing_Cooling_Air&hash=item5d4c6b3b1f and it is leaking from the seal on one corner on the main part of the regulator rather than at a connection.
I'm using a little smiths with an oxycon and propane so the flash back arrestor fits directly on to the torch very usefully.
ps_bond
29-05-2014, 07:34 AM
Ah, I thought you had the Hamilton one. Send it back. I wouldn't regard those as user-serviceable and it's not acceptable for it to leak from a seal.
Kathryn Harrison
29-05-2014, 12:36 PM
I think I will but I wouldn't mind ordering a new one to arrive soon I miss my torch! EDIT: I just googled propane regulator and flashback arrestor and saw a picture from my blog, that is the first time that has happened to me totally weird and not helpful! Anyway here is my current setup
http://madebyryn.com/wp-content/uploads/2014/01/Propane-regulator-flashback-arrestor.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.