PDA

View Full Version : Oh No, Not MoreTips!



Dennis
25-10-2010, 08:19 AM
Many of the things you buy arrive in those stiff clear window boxes, which the council won’t recycle. Cut into squares they make disposable surfaces for mixing two part adhesives, such as Araldite and Devcon. You can couple them with some plastic coffee stirrers for mixing and set them aside after use so as to monitor the setting time. By the way, I was taught to apply my adhesive with the end of a saw blade. If you cut the plastic sheet carefully, with a ruler and a craft knife It will also make a flexible straight edge for drawing or scribing on curved surfaces.

When trying gemstones into rub down bezels you are in danger of having one stuck before you are ready to set it. The traditional advice is to lay down some dental floss first so that you can lift the stone by pulling on the ends. Failing this there is a German brand of fiercely adhesive strip, ’Tesa’, which can be found on line or at DIY stores and independent stationers. A small piece of this stuck onto your stone and left for thirty seconds or so will generally allow you to lift it out. It is made for sticking things to walls, but peels away cleanly.

If, like me you like to browse the tool sections of pound shops and discount stores such as Aldi and Lidl, you might come across the Sharpening Set. This consists of three perforated plates, colour coded for different grits. They are brilliant for creating a straight edge on sheet metal and trueing the sides of rings.

Surgical forceps or haemostats, are for clamping blood vessels and retracting tissue. Someone must have manufactured a huge surplus, because they are sold cheaply in markets, discount stores, Maplins, Proops, you name it… The scissor like ends are broad and stable, The ratchet keeps them closed and the beaks can be ground smooth of serrations. Once annealed the tips can be adjusted to exert minimum pressure and support various objects vertically on a block for soldering . To support short lengths of vertical tubing without squashing them, you grip a few millimetres of binding wire and insert that into the top of the tube, but it must not touch bottom.

If you are about to recycle a jar with a large deep lid, like the one from silver dip, then the lid drilled and fitted between the body and the screw handle of your tube cutter will collect all your cuttings before they roll onto the floor. A slot at one end will accommodate the stem of the length gauge.

Below: Gear for glueing session.
Tesa products and dental floss.
Sharpening Set.
Supporting a vertical tube for soldering.
Tube cutter with fitted lid. Dennis

jille
25-10-2010, 08:50 AM
some great tips Dennis, thanks for taking the time and trouble to share them

Mia
25-10-2010, 09:40 AM
Thanks for the tips Dennis

Tabby66
25-10-2010, 09:35 PM
Yey! More tips! Keep 'em coming Dennis :-)

Like the medical forceps one.
Thanks

Tabby

DragonflyLynne
25-10-2010, 10:09 PM
Thank you very much Dennis! :)

Laceyloudesign
26-10-2010, 10:03 PM
Brilliant Dennis... I looked at some of that clear rigid plastic this morning, thinking it would be useful for something, but couldn't think what, so threw it in the bin!! Will have to buy some more chocolate puddings at weekend to get some more!!!!!

Dennis
27-10-2010, 11:05 AM
I once went to a course where the tutor began by saying that he loved chocolate, but only with over 70% cocoa. We all brought him some, which he quietly stashed, but I did not hear him thank any one. Writing these posts has become a second hobby, so I am pleased that some of you find them of use. Kind regards, Dennis.

lorraineflee
27-10-2010, 11:17 AM
Even when we don't get around to saying thanks initially, we really do appreciate your tips, so thanks from me too!!

MuranoSilver
27-10-2010, 11:58 AM
Yes you're the top tipster :Y:
love the screw lid adaptation to the tube cutter

ps_bond
28-10-2010, 09:02 AM
Yup, I have to agree the lid on the tube cutter is going to be pressed into use. One of those "now why didn't I think of that" tips! Thank you, Dennis.