Activity Stream

I would make sure that it is real silver and that the inside seam is open enough for air and steam to escape. Then I would freshen up the break with...

Yes, don't be nervous about silver. It works in a very similar way to copper, but ends up a bit harder. Dennis.

I am hoping to make something like in the picture for a friend but in sterling ( silver jubilee present). Would like to add more details ,...

thanks for this

thank you!

If Im not wrong, he said its a chemical process.. might be wrong

Before Brexit, I frequently bought from Fischer in Germany. They have a prompt and efficient service, but unfortunately no bullion. ...

I have replied to your previous post on this subject....

Look outside europe - most of the stuff sold in the EU is made in China anyway. Check with Alibaba and Aliexpress to find manufacturers. You'll still...

I don't know of any treatment other cleaning and polishing, I use Abalone a fair bit and as said just clean and polish.

Here are the contact details for the Heimerle & Meule Group Spain, you will have to see for yourself if they supply what you need. ...

I suspect that your friend has heard about the maeshori process which buffs up pearls.(buffing, heating) Not heard about that relating to mother of...

I am no expert on Brexit although I thing it will be some thing you will have to live with, we have the same problem in Australia many times the...

I replaced the one I shared with my daughter....as we can’t meet due to COVID, with product no 9996025 from cooksons. I’ve had it for 2 months now...

This is also tricky for those of us makers living in EU who can no longer afford to have supplies shipped from uk. The whole thing is a nightmare

Hi Ruthie and welcome, what brand do you have, if it is a Lortone you would almost certainly be able to repair it.

If you are on Fb and it’s specifically for clay then there are many groups who will have the knowledge specific to that and maybe even that product

Hi Briney, and welcome to the forum. It might be that no one here has used The kit, but I watched this video Imagepac Stampmaker Craft Stampmaker...

That made me laugh, at least you have sharp gravers. I will see how I get on with sorting a jig out . Thank you

Thanks China , I have tried doing it by eye but don’t find it that easy .

Thanks Peter , the graver goes in straight in this handle . Thanks for your reply.