(1 Customer Reviews)

Product Code : 999 658

Straight bladed shears - unsprung. Suitable for cutting pieces of solder, small areas of fine sheet i.e. 0.4, 0.5mm & fine wire of a similar gauge.

Only a few left - more expected 08 Aug

Was £10.45

Now £9.41
exc. VAT

(6 Customer Reviews)

Product Code : 999 644

Maun Parallel Action Pliers. FLAT: The cross section of both jaw ends are flat. This means the jaw has a flat area that is the same width all the way to the tip of the jaws. The back of the jaws ar e flat. These pliers are approx 7mm wide.

In Stock

Was £18.99

Now £16.15
exc. VAT

(2 Customer Reviews)

Product Code : 999 699

HALF ROUND... The cross section of the jaw end has one side half round and the other side flat. This is commonly used to bend rings. The half round jaw curves the metal while the flat side jaw helps reduce marks o the outside of the ring.

In Stock

Was £10.25

Now £9.23
exc. VAT

Sign in to rate this product

Product Code : 997 3003

Straight bladed red handled shears - unsprung. Suitable for cutting pieces of solder, small areas of fine sheet i.e.0.4, 0.5mm & fine wire of a similar gauge. Length: 17.5cm

In Stock

£9.00 exc. VAT

Sign in to rate this product

Product Code : 999 3055

Flat nose plier with nylon jaws - Our stainless steel pliers represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

£6.95 exc. VAT

Sign in to rate this product

Product Code : 999 3058

Plier set - Set comprises chain nose pliers, flat nose pliers, round nose pliers and side cutters and is presented in a handy canvas wallet. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

£15.40 exc. VAT

Sign in to rate this product

Product Code : 999 3051

Flat nose pliers - Our stainless steel v-sprung pliers represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

Was £5.10

Now £4.08
exc. VAT

Sign in to rate this product

Product Code : 999 3056

Ring bending pliers - Our stainless steel ring bending pliers represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

£5.45 exc. VAT

(2 Customer Reviews)

Product Code : 999 72F

Ideal for cutting uniform pieces of sheet solder. Steel with plastic coated handle, 130mm long.

In Stock

£9.65 exc. VAT

(1 Customer Reviews)

Product Code : 999 3052

Round nosed pliers - Our stainless steel v-sprung pliers represent great value for money and are perfect for regular use in the workshop. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

Was £5.10

Now £4.08
exc. VAT

Sign in to rate this product

Product Code : 999 CB8

A special two-step process which allows the crimping plier to first seperate the crimp into sections, securing each of your threads, and crush the crimp to ensure the tightest crimp possible.

In Stock

Was £9.76

Now £8.79
exc. VAT

Sign in to rate this product

Product Code : 999 725

This plier has flat nylon jaws which will protect surface finish during the forming process.

In Stock

Was £8.40

Now £7.56
exc. VAT

Sign in to rate this product

Product Code : 999 3053

Side Cutters - Our stainless steel v-sprung side cutters represent great value for money and are perfect for regular use in the workshop and home. These cutters are part of the Cookson VALUE tools

In Stock

Was £5.10

Now £4.08
exc. VAT

(1 Customer Reviews)

Product Code : 999 693

These Snipe-Nose Pliers 115mm, sprung have red pvc handles with two snipe nose ends, these are 6.7mm wide with 1.3mm tip. Snipe nose pliers are flat inside and are great to access awkward spaces. The Snipe-Nose Pliers also have a varying degrees that will more than

In Stock

Was £7.75

Now £6.98
exc. VAT

Sign in to rate this product

Product Code : 999 3054

Top Cutters - Our stainless steel v-sprung top cutters represent great value for money and are perfect for regular use in the workshop and home. These cutters are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

Was £5.10

Now £4.08
exc. VAT

Sign in to rate this product

Product Code : 999 3704

Side cutters - Our stainless side cutters represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

Was £4.90

Now £3.92
exc. VAT

Sign in to rate this product

Product Code : 999 CB8F

These multi step ring looping pliers make consistent loops using 3 barrels. The barrels measure 5, 7 and 10 mm. The lower jaw is covered with PVC tubing to prevent scratching. These pliers feature stainless steel heads and cushion grips for comfort.

In Stock

Was £9.99

Now £9.00
exc. VAT

Sign in to rate this product

Product Code : 999 CB8B

These micro crimping pliers are a hand tool which form a smooth unobtrusive crimp. It banishes forever the unsightly sharp edged crimp formed by conventional flattening methods. Use the micro crimping pliers with crimp tubes less than 2mm inside diameter.

In Stock

Was £9.76

Now £8.79
exc. VAT

(1 Customer Reviews)

Product Code : 997 3027

Tronex razor-flush cutters. These cutters are perfect for cutting wire and sprues etc. they are sprung with a soft grip handle for comfort and ease. They will cut completely flat leaving the surface completely flat.

In Stock

Was £35.00

Now £31.50
exc. VAT

Sign in to rate this product

Product Code : 997 3020

These soft handled side cutters are great for most cutting jobs such as cutting wire, thin sheet and solder strips. Do not use on steel as this will damage the cutters. They have green handles with red tops which denote side cutters

In Stock

£6.25 exc. VAT

Sign in to rate this product

Product Code : 999 3703

Round nose pliers - Our stainless steel round nose pliers represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

In Stock

Was £4.90

Now £3.92
exc. VAT

(1 Customer Reviews)

Product Code : 999 711

EF Pliers - Top cutters - sprung and flush. Top, or end cutters can be used to cut wire of less than 1.3mm (17 gauge) if it is soft, and upto 0,5mm (24 gauge) if it is hard. For larger diameter wire, use heavy-duty cutters or a jewellery saw. Dont cut

Only a few left - more expected 30 May

Was £10.25

Now £8.72
exc. VAT

Sign in to rate this product

Product Code : 999 695

Flat-Nosed Pliers are versitile Pliers that have two flat-faced jaws that can manipulate sheet and wire consitantly. It also is also used for pulling pins and rivets through holes and straightening kinks. These flat nosed pliers 115mm, sprung are used to bend

In Stock

Was £7.75

Now £6.98
exc. VAT

(1 Customer Reviews)

Product Code : 999 096L

This Cookson 5 piece, 130mm plier set contains sprung, snipe, round, flat, half round and side cutter pliers. The pliers come secure in a smart black Cookson case.

In Stock

£35.70 exc. VAT

(1 Customer Reviews)

Product Code : 999 3701

Chain nose pliers - Our stainless steel chain nose pliers represent great value for money and are perfect for regular use in the workshop and home. These pliers are part of the Cookson VALUE tools range which represents amazing value for money

Expected 08 Aug

Was £4.90

Now £3.92
exc. VAT