welcome to the widest choice of precious metals on-line direct to the jewellery trade

Was: £645.66

Save: £65.66

Now: £580.00

Durston Rolling Mill C130
Combination Jewellers Rolling Mill
Roller Size : 130 x 60mm
Sheet thickness : 7mm
Sheet width : 80mm
Wire Capacity : 8 - 1mm
No of wire grooves : 11
Gear ratio : 5-1
Extension rollers : 4 'D' shape grooves 4,3,2 & 1.5mm
Total size of Mill (without handle) : 410x220x365mm
Nett weight : 46kg
Used to reduce the gauge , or change the shape of
metal.
The change of shape will be dependant upon the shape
of the grooves in the rollers.
Both flat plate & rollers are used to reduce the gauge
in a gradual process.
Metal should be annealed between each stage of
rolling.
The distance between the rollers is reduced and
enlarged by turning a wheel on top of the mill.
On the wheel is a digital gauge for pricise rolling
gap measurement.
The rollers are made of high quality steel.
Rollers should be kept clean and mark free - marks on
the roller will be transfered to the metal surface
as it is rolled through the plates.
The Rolling Mill should be secured to a surface,
preferably by a free standing mill stand - see 999 AXW