Complete Disc Cutting Set, To Cut A Maximum Of 1.0mm Sheet, Discs From Approx. 5-16mm Diameter

Disc Cutting Set To Cut a Maximum of 1.0mm Sheet.
To Cut Discs From Approximately 5mm-16mm Diameter.
Eight punches : 5mm, 6.5mm, 8mm, 9.5mm, 11mm, 13mm,
14mm, 16mm.
Made from steel.
To operate:
Remove all cutters.
Insert metal sheet into centre slit under the circle
required.
Insert appropriate cutter and strike with hammer.
The metal disc will be stamped from the found on the
underside of the tool.
Disc stamped is size of cutter.
NB. The sheet should be annealed before stamping, and
no greater than 1.0mm thick sheet should be used.