Vice & Clamping Equipment

Showing 14 of 14 products

Ring Clamp With Side Screw

Ring Clamp With Side Screw

999 AKX

Used for holding and securing rings in various positions whilst being worked upon. Made from wood, this clamp holds the ring vertically between two felt/rubber pads. The pads are tightened a released from around the ring by turning the wing nut on

£6.29 exc. VAT

In Stock

Add

Ring Clamp-hinge  Wedge

Ring Clamp-hinge & Wedge

999 AKU

Used for holding and securing rings in various positions while being worked upon. Made from wood and works on a hinged principle. To operate: Remove wedge, the 2 halves are free to move from the pivoted point. Position ring vertically between

£8.91 exc. VAT

In Stock

Add

Bench Vice, Swivel Action With Rubber Jaws + G Clamp

999 0098

Heavy Cast Aluminium Construction Removal Rubber Covers Jaw Width 3" Maximum opening 2" Rotates to any angle

£25.39 exc. VAT

In Stock

Add

Double Ended Pin Vice

Double Ended Pin Vice

999 AKK

Made from a hard wearing metal - approx. 10cm in length. A finger held vice in which to hold small items such as screws, drill bits, watchmakers screwdriver blades etc. Each end houses a double ended collet, each of which is a different size.

£4.38 exc. VAT

In Stock

Add

Proxxon Precision Vice  Clamp

Proxxon Precision Vice & Clamp

999 8601

Proxxon Precision Vice with Clamp easily clamps to all workbenches and tables up to 60mm thick. The ball and socket clamp rotates in all directions while the strong 75mm jaws have protective covers for delicate workpieces.

Was £27.81

Now £23.64 exc. VAT

Only a few left in stock - order now

Add

Bench Vice Swivel Base G-clamp

Bench Vice, Swivel Base G-clamp

999 AZO

This general purpose bench vice has a swivel base with G clamp for ease of use, and can be fitted to any convenient work surface. The head of the vice can rotate and be locked up to 180 degrees. The jaws of this bench vice are serrated, and will open to a

£22.30 exc. VAT

In Stock

Add

Ring Clamp With Screw Base

Ring Clamp With Screw Base

999 AKW

Used for holding and securing rings in various positions while being worked upon. Made from wood, this clamp is sectioned in quarters, longitudinally with a core running through the centre. The ring is placed horizontally around the end and the

£6.29 exc. VAT

In Stock

Add

Pin Vice On 2.3mm Shank With 4     Collects

Pin Vice On 2.3mm Shank With 4 Collects

999 FAU

Mounted on a 3/32 shank and used in conjunction with the pendant motor, micromotor and hobbydrill. Supplied with 3 collets - sizes:- The Pin Vice is used if the drill has no additional collets to hold smaller drill bits etc.

£7.60 exc. VAT

In Stock

Add

Engravers Vice

Engravers Vice

999 AZP

The holes and pegs on the head of this adjustable frame makes this an ideal holder for small & odd shape items for engravo=ing, carving, setting and filing. Overall length is 152mm.

£18.65 exc. VAT

In Stock

Add

Proxxon Precision Suction Vice

Proxxon Precision Suction Vice

999 8602

Proxxon Precision Suction Vice uses the strong suction cup to fix to any smooth, flat surface. The ball and socket clamp rotates in all directions while the strong 75mm jaws have protective covers for delicate workpieces.

£28.33 exc. VAT

In Stock

Add

Record 3 Bench Vice Size 1

Record 3" Bench Vice Size 1

999 AZN

The Record 3" Bench Vice is the most popular and widely used general purpose vice for light to medium duty applications. Made from hardened steel the bench vice has a smooth action provided by it's dovetailed, long barrelled unbreakable nut. The jaws of this vice

£50.73 exc. VAT

In Stock

Add

G-clamp Large 3

G-clamp Large 3"

999 AZS

This G'Clamp is made from steel and has an opening space of 3" The G'Clamp is used for securing articles in place whilst being worked on. NB. A piece of metal or wood, should be either cut to

£7.63 exc. VAT

In Stock

Add

Pin Vice With Small Jaws

Pin Vice With Small Jaws

999 AKL

Made from steel and about 10cm in length, this tool is used to hold small tools or to support items being worked upon. The sprung jaws are opened and closed by rotating a nut on a thread clockwise or anticlockwise.

£22.77 exc. VAT

In Stock

Add

Proxxon Universal Holder

Proxxon Universal Holder

999 8603

Proxxon Universal Holder accepts all Proxxon Micromot Machines and allows the tool to be rotated and fixed in all directions. Easily clamps to workbenches and tables up to 60mm or can be fixed to the surface via 2 standard fixing holes.

£23.18 exc. VAT

In Stock

Add

Please note all prices listed are based on cash prices and are exclusive of VAT. Final price will be confirmed during the checkout process. Bullion prices are based on 10gm.

Back to top

Sign up for news, offers and competitions

Sign up!

  • Visa
  • Mastercard
  • Switch
  • iso9001
  • iso14001
  • iso18001

Customer Service

About Us

Community

© 2014 Cookson Precious Metals Ltd. VAT Registration No. GB161 8062 21. Registered in England no. 2775187. Registered Office: 59-83 Vittoria Street, Birmingham, B1 3NZ
Tel: 0845 100 1122 or 0121 200 2120 Fax: 0121 212 6456