Soldering Heating Equipment

Showing 1 - 25 of 110 products

Soldering Block - 150 X 100 X 25mm, asbestos Substitute

999 968

This soldering block is a long lasting surface on which to solder. The block can be used as is or broken into shapes to help support the item being soldered. Asbestos Substitute. Also available in sheet form - 999 969.

Best Seller
Was £4.09

Now £3.69 exc. VAT

Only a few left in stock - order now

Add

Natural Charcoal Block, 140mm X 70mm X 30mm

999 970

Used as a surface on which to solder - a good heat re- flector. Simple shapes can also be carved out of the charcoal and small pieces of metal melted into them. For LONGER LASTING soldering surfaces see:

Was £8.55

Now £7.70 exc. VAT

In Stock

Add

Soldering Sheet 300mm X 300mm X 9mm Asbestos Substitute

999 969

Sheet Size = 300mm x 300mm x 9mm. Asbestos Substitute. A long lasting surface on which to solder. The board can be used as is or broken into shapes to help support the item being soldered.

£6.59 exc. VAT

In Stock

Add

Technoflux Heat Insulating Paste   120ml

Technoflux Heat Insulating Paste 120ml

999 AAH

Technoflux cool paste is a Heat Insulation paste used to protect areas not requiring heat when soldering e.g. Stones, areas of metal or solder joins. The paste is applied liberally to the area, heat is then applied (during soldering), and once the task is

Was £6.54

Now £5.89 exc. VAT

In Stock

Add

Flux Brush Size 2

Flux Brush Size 2

946 010

Brush to apply flux, paste or liquid.

£1.35 exc. VAT

In Stock

Add

Stainless Steel Tweezers, Standard Size

999 985

Standard size with very fine smooth points. Generally used when soldering for the following:- 1.To position items when setting up to solder. 2.Placing the solder in the required position. 3.Repositioning of anything during soldering.

Was £2.10

Now £1.89 exc. VAT

Expected

Add

Honeycomb Board - Small 135mm X   95mm X 12mm

Honeycomb Board - Small, 135mm X 95mm X 12mm

999 972

Board Size = 135mm x 95mm x 12mm. Made from a ceramic material and used as a surface on which to solder - a good heat reflector and long lasting Also available in a larger size:- 200mm x 140mm x 12mm.

£8.19 exc. VAT

In Stock

Add

Iron Binding Wire 0.56mm X 100g

Iron Binding Wire, 0.56mm X 100g

998 099

Binding Wire Gauge = 24 (0.56mm diameter). Made from iron and used in soldering to aid in the support of joining two pieces of metal. Available in 3 other guages: 22g (0.69mm diam.) 998 094 26g (0.45mm diam.) 998 100

£3.60 exc. VAT

In Stock

Add

Third Hand On Base Complete

999 AAA

This tool comprises of a pair of straight reverse action tweezers and an all-angle stand on which they are supported. Generally used to help support pieces during the soldering process (eg. an ear post to the front of an earring)

Was £10.15

Now £9.14 exc. VAT

Expected

Add

Third Hand Base

Third Hand Base

999 AAA2

Third hand base only - ideal for securing tweezers, etc during soldering process. Base diameter - 60mm (approx)

£3.10 exc. VAT

In Stock

Add

Epoxy Glue 25ml Tube Un3267

Epoxy Glue, 25ml Tube Un3267

999 CJ2

A clear, high strength all purpose adhesive ideal for all jewellery applications. 30 minute drying time.

Hazardous Product

£4.49 exc. VAT

In Stock

Add

Iron Binding Wire 0.45mm X 100g

Iron Binding Wire, 0.45mm X 100g

998 100

Binding Wire Gauge = 26 (0.45mm diameter). Made from iron and used in soldering to aid in the support of joining two pieces of metal. Available in 3 other guages: 22g (0.69mm diam.) 998 094 24g (0.56mm diam.) 998 099

Was £3.55

Now £3.20 exc. VAT

Only a few left - more expected 12 Oct

Add

Heat Insulating Gel Thermo Gel    120gm

Heat Insulating Gel, Thermo Gel 120gm

998 457

Used to protect areas NOT requiring heat when soldering (eg. Stones, areas of metal or solder joins). The gel is applied liberally to the area. Heat is applied (during soldering), and once task is completed the gel is washed off with water.

£8.71 exc. VAT

In Stock

Add

Solder Probe-metal Handle

Solder Probe-metal Handle

999 AAF

Sharp Pointed Implement with a handle. Used for helping to guide the molten solder along the join whilst soldering. Also available is a slightly thicker and longer probe with a wooden handle - 999 AAE.

£6.80 exc. VAT

In Stock

Add

Reverse Action Tweezers, Straight, Insulated

999 986

Insulated - Straight Ends. These tweezers are Sprung - squeeze handles and the arms open. Useful for helping to support pieces when soldering and can be handled directly afterwards due to the insulated

£1.80 exc. VAT

Expected

Add

Third Hand With Tweezer With Short Reverse Action Tweezer

Third Hand With Tweezer With Short Reverse Action Tweezer

999 AAA1

This tool comprises of a pair of short straight reverse action tweezers and an all-angle stand on which they are supported. Generally used to help support pieces during the soldering process (eg. an ear post to the front of an earring)

£7.15 exc. VAT

In Stock

Add

Reverse Action Tweezer, Bent, Insulated, With Curved Tips

999 987

These Reverse Action tweezers are Insulated and have Curved Tips. The tweezers are sprung allowing you to squeeze the handles and the arms open. Useful for helping to support pieces when soldering and can be handled directly afterwards due to the insulated hand

£1.80 exc. VAT

Expected

Add

Iron Binding Wire 0.69mm X 100g

Iron Binding Wire, 0.69mm X 100g

998 094

Binding Wire Gauge = 22 (0.69mm diameter). Made from iron and used in soldering to aid in the support of joining two pieces of metal. Available in 3 other guages: 24g (0.56mm diam.) 998 099 26g (0.45mm diam.) 998 100

£3.45 exc. VAT

In Stock

Add

Ceramic Revolving Stand

Ceramic Revolving Stand

999 SAF

Made from ceramic(table) and aluminium(stand). A rotating stand upon which the process of soldering can be carried out directly - for a larger working area a sheet or block may be placed upon the rotating table. - Allows the work to be turned during soldering

Was £21.38

Now £19.25 exc. VAT

In Stock

Add

Ceramic Soldering Cone On Swivel   Stand

Ceramic Soldering Cone On Swivel Stand

999 978

Ceramic Soldering Cone & Stand. Used as a support and a surface on which to solder rings (the ring being placed over the cone). Spare Cones available (999 979)

£15.60 exc. VAT

In Stock

Add

Magnesia Soldering Block

Magnesia Soldering Block

999 974

This Magnesia Soldering Block is made from a Lightweight, non-asbestos fireproof material, soft enough to pin objects onto the surface for perfect soldering. Size 150 x 78 x 50mm

£6.35 exc. VAT

In Stock

Add

Honeycomb Board - Large 200mm X   140mm X 12mm

Honeycomb Board - Large, 200mm X 140mm X 12mm

999 973

Board Size = 200mm x 140mm x 12mm. Made from a ceramic material and used as a surface on which to solder - a good heat reflector and long lasting Also available in a smaller size:- 135mm x 95mm x 12mm.

Was £12.66

Now £11.40 exc. VAT

In Stock

Add

Tungsten Solder Probe

Tungsten Solder Probe

999 AAG

Sharp Pointed Implement with a handle. Used for helping to guide the molten solder along the join whilst soldering. Also available is a slightly finer and shorter probe with a metal handle - 999 AAF.

£9.60 exc. VAT

In Stock

Add

Sievert Professional Torch Kit

999 AKZ1

The Sievert Professional Jeweller's Torch Kit is ideal for all precision jewellery soldering jobs, and is suitable for use when soldering both Silver and Gold. It is also an ideal torch for working with Precious Metal Clay. This torch kit includes a 2 bar

Was £120.99

Now £108.90 exc. VAT

In Stock

Add

Please note all prices listed are based on cash prices and are exclusive of VAT. Final price will be confirmed during the checkout process. Bullion prices are based on 10gm.

Back to top

Jewellery Tools from cooksongold.com - the best tool for the job.

Our range of over 1,800 professional jewellery making tools offers anybody creating jewellery a one stop shop for all their tools, workshop equipment, sundries and those all important consumables.Cooksongold stocks a full range of tools, starting with the essential tools such as pliers, hammers, rouge, cleaning cloths and files. Combined with a wider range of tools for every application. Including setting tools, soldering tools, polishing tools, cutting and metal forming tools. Plus we now stock a selection jewellers tool kits ideal for those looking to upgrade their existing tools, or those new to the trade.

To complete your workshop Cooksons also offers a range of larger jewellers tools and workshop machinery. Everything from jewellery rolling mills, ultrasonics, microplating units and even the jewellers bench. Cookson understands that your jewellery making tools are key to your work, and therefore strive to offer good quality, value for money, combined with popular tools brands such as Vallorbe, Sievert, Milbro and beading & wire work tools from Beadalon.

Sign up for news, offers and competitions

Sign up!

  • Visa
  • Mastercard
  • Switch
  • iso9001
  • iso14001
  • iso18001

Customer Service

About Us

Community

© 2014 Cookson Precious Metals Ltd. VAT Registration No. GB161 8062 21. Registered in England no. 2775187. Registered Office: 59-83 Vittoria Street, Birmingham, B1 3NZ
Tel: 0845 100 1122 or 0121 200 2120 Fax: 0121 212 6456