Polishing Motors

Showing 16 of 16 products

Plastic Dust Hood

Plastic Dust Hood

999 AXR

A plastic dust hood for use with polishing motors. This sturdy plastic dust hood measures approximately 270mm in height, 190mm wide and 280mm deep. A hood is placed behind each mop on the polishing motor & collects all the particles produced when polishing.

£39.99 exc. VAT

In Stock

Add

Proxxon Polishergrinder

Proxxon Polisher/grinder

999 6601

Proxxon Grinding and Polishing machine with electronic speed control from 3000 to 9000rpm. The slim housing facilitates the grinding of long work pieces and includes an adapter to connect a vacuum cleaner ot the unit. The tool rests and eye guards are both

£65.50 exc. VAT

In Stock

Add

Fold Up Dust Hood

999 AX5

Sold in flat pack form, this plastic dust hood is a handy and economical alternative to metal dust hoods. A sturdy hood used to collect dust and stray compound from polishing motors. Can be easily vacuumed when required. Alternatively, perforations in the back wall

£35.99 exc. VAT

In Stock

Add

Proxxon Polishing Set For Use With Polishing Machine

Proxxon Polishing Set For Use With Polishing Machine

999 6602

Proxxon Polishing Set for Proxxon Grinding and Polishing Motor. Easily fitted to the arbour the set comprises the following - Steel wire brush for for de-rusting and cleaning steel and non-ferrous metals.

£17.00 exc. VAT

In Stock

Add

Polishing Motor -1/2hp Includes Spindles - 2800 Rpm

999 AXL

This 1/2 Horse Power Polishing Motor features two spindles, for use with various mops, wheels and compounds to finish a metal or other surface. Mops and wheels are threaded onto the spindles in preparation for use. 1HP Polishing Motor also available (999 AXM),

£189.99 exc. VAT

In Stock

Add

Economy Bench Grinder Polisher 200 Watt 150mm  Spindle With End Hole

Economy Bench Grinder Polisher 200 Watt 150mm & Spindle With End Hole

999 AX8

This compact, 200 Watt, Value Bench Grinder features two grinding stones, and can also be converted into a Bench Polisher on one side with a few simple steps. The Value Bench Grinder is supplied with a right hand spindle which can be fitted in place of the right hand

£55.00 exc. VAT

In Stock

Add

Double Ended Polisher 1hp         Complete With 2 Spindles 58      Diameter

Double Ended Polisher 1hp, Complete With 2 Spindles 5/8" Diameter

999 AXM

This motor has r p m of 2800 Used in conjunction with various mops, wheels and com- pounds for the finishing of surfaces - usually metal ! (Mops thread onto the spindles). - denoting which side they are designed for.

£249.25 exc. VAT

In Stock

Add

12 Spindle Right Hand With End   Hole

1/2" Spindle Right Hand With End Hole

999 AX4

Replacement Spindle (Right Hand) for Bench Polishers. Features an end hole at the end of the taper. This allows for mounted points, wheels, cups and felts to be used on your Bench Polishing Motor - simply tighten the mounted point into the end hole with a grub screw.

£14.50 exc. VAT

In Stock

Add

12 Spindle -left Hand 125mm Long

1/2" Spindle -left Hand 125mm Long

999 AXO

THIS 1/2" SPINDLE IS 5" (125MM) LONG WITH A MEDIUM COARSE THREADED TAPERED END

£13.10 exc. VAT

In Stock

Add

Metal Dust Hood With Collection    Tray  Guard

Metal Dust Hood With Collection Tray + Guard

999 AXS

A metal dust hood complete with side runners, mesh filter and base fitting. Placed behind each mop on a polishing motor to collect all particles produced when polishing. The guard on this model prevents anything 'snatched' by the rotating mop being propelled toward

£114.58 exc. VAT

Only a few left in stock - order now

Add

12 Spindle Left Hand With End    Hole

1/2" Spindle Left Hand With End Hole

999 AX3

Replacement Spindle (Left Hand) for Bench Polishers. Features an end hole at the end of the taper. This allows for mounted points, wheels, cups and felts to be used on your Bench Polishing Motor - simply tighten the mounted point into the end hole with a grub screw.

£14.50 exc. VAT

In Stock

Add

12 Spindle - Right Hand 125mm    Long

1/2" Spindle - Right Hand 125mm Long

999 AX1

THIS 1/2" SPINDLE IS 5" (125MM) LONG WITH A MEDIUM COARSE THREADED TAPERED END

£14.10 exc. VAT

In Stock

Add

Durston Single Motor Polishing     Machine 230v

Durston Single Motor Polishing Machine 230v

998 AX9

This new, high-tech polishing motor from Durston is designed to also act as a dust hood and dust collector while in use. The specially sealed unit features a purpose-specific fan for collecting dust and particles created during polishing. The fan is quiet, vibration

£599.99 exc. VAT

In Stock

Add

14mm Spindle - Left Hand

£19.15 exc. VAT

In Stock

Add

Polishgrinder Motor-12hp         Includes 1 Spindle  Grinding      Wheel

Polish/grinder Motor-1/2hp Includes 1 Spindle & Grinding Wheel

999 AXN

This 1/2 Horse Power Polishing/Grinding Motor includes one spindle and one grinding wheel, with spindle on the right hand side. The spindle is used in conjunction with various mops, wheels & compounds for the finishing of surfaces - usually metal. Polishing

£198.75 exc. VAT

In Stock

Add

58 Left Hand Grinding Wheel      Attachment

5/8" Left Hand Grinding Wheel Attachment

999 CBK2

This spindle can be attached to 999 AXM,one HP polishing motor or any motor that will take a 5/8" inch spindle, to hold a grinding or Artifex wheels. This spindle is designed to be used on the left hand side of the motor.

£25.45 exc. VAT

In Stock

Add

Please note all prices listed are based on cash prices and are exclusive of VAT. Final price will be confirmed during the checkout process. Bullion prices are based on 10gm.

Back to top

Jewellery Tools from cooksongold.com - the best tool for the job.

Our range of over 1,800 professional jewellery making tools offers anybody creating jewellery a one stop shop for all their tools, workshop equipment, sundries and those all important consumables.Cooksongold stocks a full range of tools, starting with the essential tools such as pliers, hammers, rouge, cleaning cloths and files. Combined with a wider range of tools for every application. Including setting tools, soldering tools, polishing tools, cutting and metal forming tools. Plus we now stock a selection jewellers tool kits ideal for those looking to upgrade their existing tools, or those new to the trade.

To complete your workshop Cooksons also offers a range of larger jewellers tools and workshop machinery. Everything from jewellery rolling mills, ultrasonics, microplating units and even the jewellers bench. Cookson understands that your jewellery making tools are key to your work, and therefore strive to offer good quality, value for money, combined with popular tools brands such as Vallorbe, Sievert, Milbro and beading & wire work tools from Beadalon.

Sign up for news, offers and competitions

Sign up!

  • Visa
  • Mastercard
  • Switch
  • iso9001
  • iso14001
  • iso18001

Customer Service

About Us

Community

© 2014 Cookson Precious Metals Ltd. VAT Registration No. GB161 8062 21. Registered in England no. 2775187. Registered Office: 59-83 Vittoria Street, Birmingham, B1 3NZ
Tel: 0845 100 1122 or 0121 200 2120 Fax: 0121 212 6456